
Creality K1C/K1MAX silent covers 5015 Fan
Remix of Chìa khóa camera retro hỗ trợ Airtag cho Nikon By Ukstl_1353316
- Downloads
- 142
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 6 5.4 MB
- Цельная V1.stlSTL · 967.8 KB
- Левая V1 С фаской.stlSTL · 1.4 MB
- Правая V1 С фаской.stlSTL · 1.4 MB
- Вставка 5015.stlSTL · 11 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #420170
- Category
- Máy In 3D
- Published
Description
Захотел поменять вентилятор системы охлаждения на 5015, пересмотрел все варианты в сети не нашел ничего, что было бы функциональным и эстетичным одновременно. Я взял за основу модель Stanislau Shchahliakи полностью переработал дизайн и систему крепления. Так же модель разделена на две половины, что позволяет напечатать её без поддержек и при этом максимально красиво, после чего её можно склеить. Теперь эта модель выглядит как заводское решение. Шум принтера по ощущениям уменьшился вдвое, и на него по прежнему приятно смотреть. Печать производилась пластиком ASA.
Цельную (не разделенную пополам) версию я не печатал, но выложил для желающих попробовать.
I wanted to upgrade the part cooling fan to a 5015 blower, but after reviewing all the options online, I couldn’t find anything that was both functional and aesthetically pleasing. I used Stanislau Shchahliak’s model as a starting point and completely redesigned both the appearance and the mounting system.
The model is split into two halves, which allows for support-free printing with a clean finish. Once printed, the halves can be glued together. The result looks like a factory-installed part. The printer noise feels cut in half, and it still looks great. Printed in ASA filament.
I haven’t printed the solid (non-split) version myself, but I’ve uploaded it for anyone who’d like to give it a try.
Print spec
- Formats
- stlstp
- Model files
- 6
- Total size
- 5.4 MB
- Largest file
- 1.4 MB












