Skip to main content
F3D
Moss Pole Petit (70mm) - Trụ leo cây thông minh 1

6 images

Large file collection Đồ Gia Dụng

Moss Pole Petit (70mm) - Trụ leo cây thông minh

By MochPoch

Downloads
743
Likes
127
Views
2,835

Files 30 47.2 MB

  • Backing_200mm_1775110994.stlSTL · 982.2 KB
  • Backing_145mm_1775110995.stlSTL · 982.2 KB
  • Backing_100mm_1775110996.stlSTL · 982.2 KB
  • Large_Hex_200mm_1775110997.stlSTL · 2.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Stackable Moss Pole - Petit 70mm v1.1.0

Smaller version of the Moss Pole by MochPoch

New Bamboo moss pole system has been released. Click here 🌱

Licensing

If you'd like to support my projects or obtain a commercial license, consider joining my Patreon membership: 
https://www.patreon.com/MochPoch 

For one-time support, you can also fuel my creativity with a cup of coffee: 
https://buymeacoffee.com/MochPoch 

Dimension and Compatibility

Length (mm)

Width

70

Depth

38

Pot Size

This plant support pole will fit pots that are at least 70 cm in diameter. However, the smallest base available is 60cm in diameter. 

Pot and Pole Medium

This plant support pole has been tested with moss, aroid mix and LECA pebbles. 
The base on the other hand has been tested with soil, mineral substrate, aroid mix and LECA pebbles.

Plant

It is best used for plants with finer roots like (but not limited to) Philodendron Heartleaf, Brasil, Silverstripe etc. Let's grow this list together. Let me know which plant of yours thrive in this pole version. 

Do you have a plant with a thicker root system? Try the original 118m wide version.

Build and Assembly

The climbing plant support is made of the following components:

The basic combination includes: base + backing + grid

Post Processing (optional)

The following steps are suggested in order to prevent roots from attaching to the layer gaps. As with any other closed-back growing poles, the roots tend to attach to the backing for support. 

The option you choose depends on the material you printed with:

  • Applying a coat or sealant, or
  • Sanding the inner portion of the component 

Print Configuration

Parameter

PLA

PETG

Nozzle diameter

0.4 mm

0.4 mm

Layer Height

0.2mm

0.2mm

Print Speed

Printer-default 
(50% is recommended) *

50% 
(slow/silent mode) *

* bed adhesion is crucial for the success of this print. The brim setting on some parts help with this.  Slow speed can be set after the print (for some printers) has started, instead of fiddling with the print speed for the different layer components

 Backing

  1. Print top-side-down without supports. (Where the insert flap is at the top.)
  2. Outer Brim set to 20 mm width. 
    (Brim-object gap may be set to 0.13 to avoid the need to deburr but it might affect the bed adhesion negatively)
  3. Set at least 3 walls

Grid

        Print flat on the bed without brim and support.
        ** If you find the grid too loose or tight in the backing, you can increase/decrease the depth.

Base / Leg

Parameter

Round/Skirt Base

Tapered Base

Walls

At least 3

At least 3

Brim

None

Outer Brim at 15mm width

Support

None

None

Improvements

  • Model is still being improved - there will be incremental changes but rest assured that the parts will remain compatible with each other.
  • Requests are welcome - should you need a different dimension or a part specific to your need, let me know and I will try my best to make it available.

Thanks for checking out my moss pole! If you like what you see, don't forget to hit the like button and add a make. I would love to see the plant growing on the pole. Your support helps me collect Prusameters and keep this project going. If you want to support even more, I would appreciate a cup of coffee. Good luck with growing the plant(s)! :D

Versioning

Version

Change Log

1.1.1

Added requested Small Hex Grid (145mm)

1.1.0

Added requested parts:

  • New hex grid with size between small and medium:
    • Small Hex Type 2 (200mm)
  • New base (based on the original tapered type)
    • Tapered Base (100mm)
    • Tapered Base (160mm)
    • Base Insert (for 160mm)

1.0.0

Original models added

Thanks for checking out this model. You might be interested in my other projects:

Bamboo Moss Pole

Stackable Moss Pole

Plant Care/Accessory

Planter

PetLibro Accessory

Read more Show less

Print spec

Formats
stl
Model files
30
Total size
47.2 MB
Largest file
2.5 MB

0 comments

See all