
Hệ thống xích dẫn cáp cho Neptune 3 / 4 Series
- Downloads
- 1,642
- Likes
- 375
- Views
- 7,418
- Remixes
- 1
- Comments
- 0
Files 23 35.2 MB
- LS-Chain_BottomBracket_v12b_1775104994.stlSTL · 3.2 MB
- LS-Chain_BottomSupportBracket_v09_1775104996.stlSTL · 982.2 KB
- LS-Chain_Z-Mount_PartA_4Pro_v10_1775104997.stlSTL · 853.6 KB
- LS-Chain_Z-Mount_PartB_4ProNoChain_v10_1775104997.stlSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #281090
- Category
- Máy In 3D
- Published
Description
update(jan 24, 2025): 4pro is currently incompatible with the section ZMount<>Extruder cause it a very different mounting plate - just follow the recommended path!
This chain system is trying to overcome some shortcommings of the original Chain system for the Neptune 4 Series. There are Adapter-chainlinks available so you can mix and match the old and new system if you like.
Features
- tighter tollerances
- less sag
- strainrelief for the x Axis stepper and Limit switch cable
- N4 Plus/Max compatible
- mulitple Options regarding Z-Mount to Extruder Assembly chaining
- STEP File available
- seperate PDF file containing some tips on how to use the various Parts of this system
- large internal volume chain links and
- outside cable tie mounts(TBD)
- Adapter from and to the old system to allow use of anything that was original build for the old system
Printing Recommendations
- Material: PETg or ASA/ABS
- Slicer Orca, Wall Generator Arachne
- Linewidth/layerheight: 0.4/0.2
- 3 Wall, 5 toplayer, 3 Bottom layer
- For weightsaving 2 / 4 / 3 is ok(10% weight saving across the system)
- 6-10% Infill Honeycomb or Gyroid
- Arachne “min wall width” 75%
- Wallorder: inner/outer/inner
- Support required for Z-Mount, Sidesupport. normal supports, from buildplate only
- Chainlink Count
- N4/Pro: 21 bottom, 5 Sidesupport<>ZMount, 18 to extruder
- N4 Max: 35 bottom, 5 Sidesupport<>ZMount, 30 to extruder
- try to avoid Brim use for chainlinks - may require significant cleanup
- assembly requires glue!!
Versions
v12b - minor link optimisations
v12 - rebuild adapter links, compatibility to SilencedFrost X-Linear Rail Mod
v11b - added Neptune 3 Extruder Mount to have it fully N3 series compatible
v11 - fixed 4Max cablelength beeing to short
v10b - sidesupport beeing less restrictive for stepper/endstop cable routing
v10 - initial release
-----
Feel free to buymeacoffee.com/lamarc
Print spec
- Formats
- pdfstepstl
- Model files
- 23
- Total size
- 35.2 MB
- Largest file
- 5.9 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -
New -

-

-

-

-

-



