Khay để đồ Suzuki Jimny (bản số sàn)

Jimny manual storage under the cigarette is somewhat disappointing, it is very small and feels like an afterthought.

That is why I designed this, to fit 3 purposes:

1. Make a better use of that space
2. To hold my phone. Android Auto works like a dream with no need to look at the phone and neither have ugly bulk stuff hanging from the dash.
   1. For trips, it needs to allow the phone to be charged.
3. It must use all 3 stock clips, no discussion.

This is 3D printed so I tried to:

1. Make it as FDM friendly as possible. 
2. Use the least amount of filament, printing a box is easy but too much waste and long prints
3. The least amount of support and bridging, none if possible.

This is how I printed it, this removes any ugly surface and leave nice curves.
This shouldn't be a problem, I printed both PLA (a few prototypes) and ASA without glue or anything just fine.

Snug IMHO is still a solid support, it provides a decent support and easy to remove.

This is how it looks, not too bad with snug support and it is facing the back so who cares :)

There are two version:

1. Model01_V01.stl: The reason I started this all, I have a Pixel 7 Pro with QuadLock case, the phone has to fit in there plus allow charging.
   I thought about adding a wireless charging but there are so many, heat problems, etc, so forget about it.
2. Model02_V01.stl: If you are after a print-and-replace 

To help keeping things from falling off.
Some edges were left flat on purpose, otherwise, they look garbage if printed on Z-axis like a little stairs.
Other corners have a nice fillet, if printed on X and Y-axis direction.

INSTALLATION

Put the stock white clip back in place, place this organizer like so.
You will feel when the clip got into its little track, if you try to pull the organizer up it wont come, only then slide all the way towards the engine until you feel the clip getting locked in place.
Use the clips hole on the side as guide, they must align. 

Put the stock black clips back.
 

This is how much space you have now :)