Thẻ lấy ve chó / Dụng cụ nạy

This tick removal card can help you remove ticks that have bitten into and are stuck to your skin. It has the same base dimensions as a credit card. However, at 1.5mm thickness it's a bit thicker than a standard credit card. It should fit your wallet anyways.

At 0.2mm layer height it prints in roughly 25 minutes. You can get to 31 minutes in 0.15mm layer height.

Please post a Make of this print if you liked it and it was useful to you. Thank you!

Disclaimer

I am not a certified medical professional nor is this tick removal card a certified medical tool in any way. It works for me, it might not work for you. I am not liable for any damage done to you or anyone else that arises from using this tick removal card.

Ticks are nasty and might inflict serious illnesses and infections. Always consult a doctor if you get bitten by a tick.

Usage

Slide the long groove of the card around the jaws of the tick and gently, steadily, and slowly pull straight upwards until the tick comes off. Do not twist or turn the tick or the card!

Print Instructions

• Layer height: 0.2mm or 0.15mm
• Top and bottom layers: 5 at a minimum
• Infill: Does not matter as top and bottom layers lead to solid infill all the way through
• Material: PLA+, PLA or PETG