Skip to main content
F3D
Gimbal thứ 3 cho Flysky FS-i6X (FS-i6) 1

36 images

DIY

Gimbal thứ 3 cho Flysky FS-i6X (FS-i6)

By FreddieBisho_4279530

Downloads
6
Views
119

Files 5 2 MB

  • Gimbal_Housing_1775998897.stlSTL · 187.4 KB
  • Gimbal_Locking_Insert_1775998899.stlSTL · 152.4 KB
  • Gimbal_Mounting_Hole_Template_1775998900.stlSTL · 30.1 KB
  • Gimbal_Stick_1775998901.stlSTL · 99.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Flysky FS-i6X (FS-i6) 3rd Gimbal

Hi, I have designed a fully functional 3rd gimbal that can be run off 2 of the Aux’s (VRA & VRB) with minimal modification to the original components and no extra programming needed while still maintaining the full functions of the VRA & VRB Aux dials!

Personally, I found the VRA & VRB dials are in the wrong position on the controller and the dials too difficult to use reliably while operating the model that I tend to try and avoid using them. This mod makes use of the VRA & VRB dial potentiometers to allow an ergonomically placed gimbal/joystick to operate them and is perfect for FPV or camera pan and tilt operations while simultaneously operating the main joy sticks. The original dials can still be used in their normal way without the need for switches or unplugging anything (they can be used to trim the 3rd gimbal too!).

For the full in-depth step by step build guide, please see my Instructables: Click Here  

You can also find the full guide in the downloadable files

Parts Needed:

  • Flysky FS-i6 or FS-i6X Controller

  • 3D printed parts (listed below)

  • 16x16 B502 2 axis gimbal – also known as joystick or rocker - these can be sourced off most toy style transmitters or very easily online (I got mine from an old Syma controller) - (Ideally you want one with both axis self-return but non-self-return variants work too)

  • 6 x approx. 300mm lengths of 22AWG wire (of different colours) OR

  • 2 x sets of prewired 3 Pin 1.25 mm JST Plugs or similar (optional) 

  • Heat Shrink 

  • 3 x M2 Threaded inserts

  • 3 x M2x6mm screws

  • 3 x M2 Washers

  • Option – if you don’t want/can’t use threaded inserts. It is possible to use M3/M3.5 x 6mm self-taping screws instead.

Parts To Print:

  • Gimbal Housing

  • Gimbal Locking Insert

  • Gimbal Mounting Hole Template

  • Gimbal Stick

I am a hobbyist designer and creator and love to know how I can improve my designs so any comments or advice on how my design or guide could be improved are always welcome! Thank you for reading my tutorial and have fun making!

Happy Printing!

Read more Show less

Print spec

Formats
pdfstl
Model files
5
Total size
2 MB
Largest file
1.6 MB

0 comments

See all