Bộ kẹp và giá đỡ súng phun lửa (Flame thrower)

Body clamp and mount for lighter to mount onto fire extinguisher if your building a flame thrower. Uses TBTeek torch from Amazon (cheapest one i could get). Lighter slots into the print so it doesn't rotate and you use 2 hose clamps to clamp it to the extinguisher. Extinguisher is just a emptied Kiddie KD61-5BC from Walmart.

Print at 50% infill and triangle structure,  big piece is at a -22% angle and small one is -15% to prevent the print from snapping. I just used pla and have had no problems with it. 

Rest of the build is just a tire valve stem with a 1/2 inch hole in the tank for it to be pulled through.