Mô hình Chú thỏ Phục sinh Smoothed

Printed on: Ender 3 V3 KE
Layer height: 0.12 mm (0.2 mm should also be good)
Infill (200% scale): 3% - 6% Gyroid is enough
Infill (100% scale): 50% lightning is also good 
Raft: No

Support: Tree, organic (only on build plate) 
Filament: JAYO PLA Matte White
Scale: 200% (88.43 mm x 114.21 mm x 159.51 mm)
Print time (200% scale): around 3.5 - 4.5 hours (slicer shows 5-6 hours) 
Print time (100% scale): around 1.5 - 2 hours