
Giá đỡ thùng Akro cho máy nạp đạn Lee Pro 1000 mới
- Downloads
- 26
- Likes
- 5
- Views
- 517
- Remixes
- 0
- Comments
- 0
Files 1 5.7 KB
- Finished_round_akro_bin_for_Lee_Pro_1000_1766398404.stlSTL · 5.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #27273
- Category
- Thể Thao & Ngoài Trời
- Published
Description
I use a inline fabrication mount for my old(red base) and new Lee Pro 1000 presses. With the old style the mount came with a bracket to catch the finished rounds in a bin. With the new(silver base) pro 1000's they are lower and that same bracket doesn't work so I made this little mount to catch the rounds on the new style. It will mount under the screw on the left side of the press and use the same plastic wing nut that came from inline fabrication. I used Cf nylon. The one picture is with a large bin full of .38 special with no bending, its rock solid. Your results my very with PLA or other material.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Coex CF Nylon Black
Notes:
I printer this on edge with a brim so the layer lines are not running the same direction as the weight in the bin when full.
Category: Sport & Outdoors
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 5.7 KB
- Largest file
- 5.7 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-

-


