Skip to main content
F3D
Bộ khung nâng nắp Qidi Plus 4 để gắn dải đèn LED 1

4 images

Máy In 3D

Bộ khung nâng nắp Qidi Plus 4 để gắn dải đèn LED

By stew675_2525901

Downloads
348
Likes
75
Views
2,724
Remixes
1

Files 6 16.3 MB

  • Front-Joiner_1776840471.stlSTL · 2.1 MB
  • L-Corner_1776840473.stlSTL · 2.4 MB
  • Left-Joiner_1776840474.stlSTL · 3.3 MB
  • Rear-Joiner_1776840477.stlSTL · 2.6 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

A lid riser for the Qidi Plus 4.  Compatible with the use of a Qidi DryBox mounted to the stock filament mounting arm.  The use of the stock carry handles is also retained.

This lifts the glass lid up by around 25mm which also allows for better clearances for the stock bowden tube, resulting in a smoother filament path.

The rear joiner piece allows for the easy insertion of most standard USB cables with a minimal air gap.  This allows for a COB LED lighting strip to be affixed to the inside of the riser, which can then be powered by the USB port on the top rear of the printer.  This greatly improves the lighting within the print chamber, resulting in clearer timelapse videos, or just print monitoring in general.

Recommended filament is anything that can withstand sustained 80C temperatures, such as ABS, ASA, PC, PET, PA, PPS.  CF infused filaments are optional, but will minimise the chance of print warping in the narrower sections.

No supports needed.  I used 3 walls.  10% infill, and printed in ASA myself.

Note: Two of each of the corner pieces are needed for the full assembly.  Only one of each of the other pieces is needed.

Support

Enjoying my work?  Consider buying me a coffee!    https://ko-fi.com/stew675

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
16.3 MB
Largest file
3.3 MB

0 comments

See all