
T-nut cho thanh nhôm định hình 2020
- Downloads
- 1,744
- Likes
- 685
- Views
- 5,964
- Remixes
- 0
- Comments
- 0
Files 19 4.6 MB
- T-nut_2020_drop-in_M3_thread_1776545061.3mf3MF · 333.2 KB
- T-nut_2020_drop-in_M4_thread_1776545062.3mf3MF · 377.7 KB
- T-nut_2020_drop-in_M3_nut_1776545063.3mf3MF · 48.6 KB
- T-nut_2020_M3_tread_1776545064.3mf3MF · 258.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #271925
- Category
- DIY
- Published
Description
This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with pre-tapped threads or to be fitted with regular nuts, and there are T-nuts that can be dropped into the slots or to be pushed into the slots from the side, and there are also T-nuts with double screw fastenings, these are 10 mm apart.
Printing and print settings
Use PLA or PETG and a nozzle width of 0.4mm or less and 100% infill to make it solid. For the threaded T-nuts, you will need to print with a layer height of 0.12 mm and I also recommend that you print the models at a low speed, e.g. 50 mm/s, to make the threads usable. My recommendation is to print the T-nuts without a support structure, but with a 2-3mm brim, as the footprint is small. However, there is one exception, the drop-in T-nuts for the M3 nut need to be printed upside down with a support structure. In the model files the parts are oriented in the best direction for printing. There is no need for post-print finishing of the threads and the screws are easy to screw in.
Print spec
- Formats
- 3mff3d
- Model files
- 19
- Total size
- 4.6 MB
- Largest file
- 511.3 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-
New -
New -


