Skip to main content
F3D
Nâng cấp chân đế đơn giản cho dòng máy Creality K1 1

2 images

Máy In 3D

Nâng cấp chân đế đơn giản cho dòng máy Creality K1

By 3DPHUB

Downloads
422
Likes
59
Views
2,023

Files 4 41.6 MB

  • V1_-_Simple_PLA_Inserts_Factory_Screws_1775996840.stlSTL · 888.9 KB
  • V2_-_Prevents_feet_from_falling_off_M3x20_Screws_1775996842.stlSTL · 19 MB
  • V3_-_Complete_One-Piece_Foot_Needs_Support_M3x12_Screws_1775996844.stlSTL · 13.1 MB
  • V4_-_Complete_One-Piece_Foot_Less_Support_M3x12_Screws_1775996846.stlSTL · 8.6 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#271692
Category
Máy In 3D
Published
License
Standard Digital File License

Description

There are 4 different options: 2 simple inserts, and 2 one-piece designs that raise the printer.

The stiffening feet inserts are a great first mod, without the need for tools, experience or fancy print settings. Simply print 4 inserts and press them into the feet of the printer. It couldn't be any easier.  This will eliminate the excess slop that can cause folding / buckling. The end result is better quality prints (less VFA) and higher max accelerations (due to the input shaper not having to cut as aggressively). This can be fine tuned by changing the settings or filament. Below are the settings I used:

Orca slicer: Press Q or look for the  auto-orientation button

Creality Print: look for the auto-orientation button

VERSION

DESCRIPTION

PRINTING NOTES

V1

Simple insert

PLA, 2 walls, 15% honeycomb, no support

V2

Prevents the feet from falling off

Same as above, print upside down

V3

Complete one-piece foot which won't fall off

Use TPU, 2 walls, 15% honeycomb, support

V4

Same as V3 with less support required

Use TPU, 2 walls, 15% honeycomb, support

INPUT SHAPER BEFORE / AFTER COMPARISON (DELTA = IMPROVEMENT)

Results provided by Paperthin

Stock feet

With inserts

Delta

Max acceleration X (V1)

12000 @ 63.8 Hz

12600 @ 65.4 Hz

5%

Max acceleration Y (V1)

11300 @ 61.8 Hz

14700 @ 61.4 Hz

30%

Purcell bad stock K1 MAX

Stock feet

With inserts

Delta

Max acceleration X (V1)

5400 @ 42.8 Hz

5900 @ 44.6 Hz

9.26%

Max acceleration Y (V1)

5600 @ 43.6 Hz

5800 @ 44.2 Hz

3.57%

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
41.6 MB
Largest file
19 MB

0 comments

See all