Khung gắn 22.5° cho MMU3

UPDATE: (2024-11-25) I have added a version of the underslung right bracket with a full protective cover for the PD board.

I have previously created a 22.5° remix of the MMU2 brackets due to my use of a cabinet and feeding from above.   Those brackets will also work with an MMU3, but not with either the MMU3 Label plate or with universaljoint**'**s wonderful MMU2 Underslung control panel mount.

This remix provides 22.5° brackets for the MMU3 with the Label plate.  

There are 3 model files.  MMU3-22.5 can be used for both sides without the underslung control panel.
 

If you are using the underslung panel like I am, the left and right bracket are different.  
MU3-22.5-under-R  is designed with a slot to fit and hold the PD-board addon board. When installing the right bracket, make sure the PD-board is installed first, then slide the bracket in from the side carefully aligning the board with the slot.  Once pushed tight, the mounting holes in the bracket align with the Underslung case and the bracket will act as additional support for the PD-board.

There is no version with a power switch since the MMU3 can be enabled and disabled via a menu setting.

If you do not want the MMU3 Label plate and are not using the Underslung control panel, my 22.5 degree MMU frame mount will work fine.