Skip to main content
F3D
Ngăn kéo dưới hệ thống AMS cho máy in Bambu Lab 1

3 images

Máy In 3D

Ngăn kéo dưới hệ thống AMS cho máy in Bambu Lab

By RobertONeill_540978

Downloads
222
Likes
91
Views
3,397
Comments
3

Files 20 4.7 MB

  • ams_Drawer_back_x2_r1_1766517975.STLSTL · 55.9 KB
  • ams_Drawer_Drawer_face_Right_r1_1766517976.STLSTL · 68.3 KB
  • ams_Drawer_Middle_r1_1766517977.STLSTL · 189.9 KB
  • ams_Drawer_Spacer_x3_r1_1766517977.STLSTL · 38.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#26818
Category
Máy In 3D
Published

Description

Pair of drawers that fit under the AMS system.  Can fit on the X1 print bed. Some of the parts are diagonal to fit.

Minimal support needed.

Most of the parts need to be glued together.  The drawer faces can be slid on .  I plan on using a off the shelf  handle from the hardware store.

The styling is lacking. But a good framework.

It is intended for stick on rubber feet.  Many sizes and shapes work. You might choose to sand the print a little, to give it a good attachment.

There is a feature to prevent the drawer from coming out too easy. Just lift up on the front to remove.

The build direction is shown in one of the images.

Read more Show less

Print spec

Formats
3mfstl
Model files
20
Total size
4.7 MB
Largest file
575.1 KB

3 comments

See all