Diorama Street Fighter 2 (Sân đấu Ryu)

Here I share the RYU Diorama. This model is designed with multi-layer depth, textured clothing, and separate parts to achieve the finish and relief of a real collector's figure.

🛠 PRINTING INSTRUCTIONS & TOLERANCE TEST: First, print Ryu's character and run the tolerance test. The base slots have a 0.25 mm offset from the characters and buildings. This value may be sufficient for you, or you'll need to increase or decrease it after testing with the values in photo . You'll need to correct the X-Y hole compensation.

The value you obtain should only be used when printing the platform( For me I used 0.05 ). Ryu and Ken need glue for some parts. In the provided files, I duplicated these parts because they are thin, in case they break when peeled off. All parts are oriented downwards for a better finish. In the sky file, you can find the yellow areas separately if you want to highlight these, just like the K.O. sign. I have also added files in case you prefer keychains or magnets, or if you want to set up manual color changes. I hope you like it. Write me if you have any questions.

🥋New Edition: Discover the latest high-detail models, new characters, and modular stages here: 

https://makerworld.com/en/collections/20276506-sf2-ultimate-edition

Guile Stage (Air Force Base): https://makerworld.com/en/models/2327858-guile-stage-air-force-base-sfii#profileId-2542973

🧵 Want to go the extra mile?

You can help me create and test new designs by joining my team! Support my work here:

https://ko-fi.com/luzia3dstudio