
Ốp lưng dành cho Fxtec Pro1(X)
- Downloads
- 182
- Likes
- 3
- Views
- 1,322
- Remixes
- 0
- Comments
- 0
Files 14 13.2 MB
- fxtec_pro1x_base_nologo_1775072869.stlSTL · 1,020.9 KB
- fxtec_pro1_base_nologo_1775072870.stlSTL · 1 MB
- fxtec_pro1x_base_neg_sfos_1775072872.stlSTL · 1.5 MB
- fxtec_pro1x_base_logo_1775072872.stlSTL · 476.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #265626
- Category
- Dụng Cụ Tiện Ích
- Published
Description
This is a mobile phone case for the Fxtec Pro1 and Pro1x models.
There are slight differences between the two. USB and fingerprint reader locations. Screen protection is the same on both.
It features a small lip around the edge to match up with the bevel on the case halves. This still allows the phone to close normally.
I have not included a space for the headphone jack as this left an opening in the top edge and weakened the hold the case had.
The two shallows on the top part are to allow for SailfishOS swipe usage.
Print with supports on build plate only.
If you have any suggestions for improvements and/or tweaks, feel free to let me know.
15/04/23:
Updated a version to work with TPU. They include TPU in the name. The others are thinner and work good with PETG.
29/10/22:
Updated the top half to offer better screen protection and a version for non sailfishos users. A new version of the base has also been uploaded to allow for the change in USB position for the Pro1X.
29/11/22:
Added model with Headphone hole.
Print spec
- Formats
- stl
- Model files
- 14
- Total size
- 13.2 MB
- Largest file
- 1.6 MB
0 comments
You may also like 12 models
See all-

-

-
New -

-
New -

-

-

-

-

-

-


