
Mô hình HP Otto AT-ST có thể đi bộ
- Downloads
- 7
- Likes
- 12
- Views
- 277
- Remixes
- 0
- Comments
- 0
Files 10 18.8 MB
- Link_x2_1774702724.stlSTL · 1.3 MB
- Foot_x2_1774702726.stlSTL · 1.4 MB
- Long_link_x2_1774702727.stlSTL · 1.5 MB
- TOP_BODY_1774702728.stlSTL · 2.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #265316
- Category
- DIY
- Published
Description
Introducing the HP Otto AT-ST
🧩 What This Module Does
-
Encases the HP Otto in a fun and immersive body
-
Lets Otto perform walking, stepping, and head panning movements
-
Great for STEM challenges, robotics lessons, or just giving your robot a new personality
🔧 How It Works
-
After Printing all the parts, Assemble the lower body and install the two servos for the leg movement.
-
Use 2x Motor Cross pressed into the "Cam x2" printed part, this will drive the linear motion.
-
With the Parts assembled you can add the final servo for the head, and ensure each servo wire is sticking out.
-
Attach the Board, and optional "Ultrasonic" Eyes for aesthetics
-
Connect the two servos for the legs, and head servo, noting the output of the port on the board. (this will be important for programming later)
-
The mechanism converts servo rotation into a walking linear motion
-
No soldering—just print, assemble, and plug into the Invent ports
📦 What You Need
- HP Robots Starter Kit (electronics, battery, 3x servos)
Print Settings
-
Following prints with at least 4 walls and 22% infill to ensure strength:
-
Long link x2
-
Link x2
-
Cam x2
-
Turret pin (x10)
-
-
Remaining prints with atleast 4 walls:
-
Foot x2
-
BOTTOM BODY
-
Head
-
Caution:
This is V1 so please be patient as I print and check tolerances.
please check back for updated print files
I hope to have code programed for it by the end of the contest date, but any help would be appreciated as coding is not something I am entirely familiar with.
Door for the head needs to be re-worked and will be updated shortly
Designed the motion using Linkage and mimicked a Hoeken example rotated and modified slightly, trying to following a single linear path for the legs to move on.
Please comment any issues or design changes that would help!
Cheers!
Print spec
- Formats
- stl
- Model files
- 10
- Total size
- 18.8 MB
- Largest file
- 4.1 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-
New -

-

-

-


