
Chú Ngựa Dễ Thương (Cute Horse)
- Downloads
- 27
- Likes
- 10
- Views
- 162
- Remixes
- 0
- Comments
- 0
Files 5 78.8 MB
- CuteHorse_Multicolor5ColorPrusaSlicerXL_1774106544.3mf3MF · 13.4 MB
- CuteHorse_Multicolor5ColorBambuStudioH2C_1774106546.3mf3MF · 13.6 MB
- CuteHorse_Multicolor5ColorBambuStudioX1C_1774106548.3mf3MF · 13.6 MB
- CuteHorse_Multicolor5ColorBambuStudioH2D_1774106550.3mf3MF · 13.6 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #260575
- Category
- Thế Giới - Mẫu Scan 3D
- Published
Description
ℹ Tips for printing:
-
Filament: PLA
-
Supports: No!
-
Layer height: 0.16mm
-
Wall loops: 3
-
Infill: 15%
-
Seam position: back
-
Wall generator: -
-
Detect thin walls: -
-
Brim: No!
-
BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
-
Info‼: Do not scale the Horse any smaller otherwise the connections will no longer work!
------------------------------------------------------
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (3 Color):
-
PLA Matte / LightBrown
-
PLA Matte / DarkBrown
-
PLA Matte / White
-
PLA Matte / Black
-
PLA Basic / DarkGreen
Or decide for yourself which colors and how many you want to use!
ℹ This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!
------------------------------------------------------
ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!
(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)
Print spec
- Formats
- 3mfstl
- Model files
- 5
- Total size
- 78.8 MB
- Largest file
- 24.6 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


