Articulated Cute Jellyfish

ℹ I have created a step-by-step assembly guide, which you can find as a PDF file in the download folder. Please take a moment to read it before starting the assembly.

ℹ Tips for printing:

• Filament:PLA

• Supports:No!

• Layer height: 0.16(0.15)mm or 0.2mm

• Wall loops: 3

• Infill: 15%

• Seam position: back

• Wall generator:Classic

• Detect thin walls: -

• Brim:No!

• BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

• Info‼: Do not scale the Jellyfish any smaller otherwise the connections will no longer work!

• Info‼: If you apply too much force to the connections they may break because the connections are small!

• Info‼: Please be careful when removing the Jellyfish from the print bed!

------------------------------------------------------

❌‼Disclaimer‼❌These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (4 Colors):

• PLA Basic / Yellow

• PLA Matte / Orange

• PLA Matte / Black

• PLA Matte / White

Or decide for yourself which colors and how many you want to use!

ℹ This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!

------------------------------------------------------

ℹ New multicolor version (3mf)!This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)