
Khung giữ tản nhiệt cho Android Box S905x4
- Downloads
- 0
- Likes
- 0
- Views
- 77
- Remixes
- 0
- Comments
- 0
Files 3 668 KB
- Heatsink_Frame_1773965230.f3dF3D · 375.4 KB
- Heatsink_Frame_1773965231.stepSTEP · 218.8 KB
- Heatsink_Frame_1773965232.stlSTL · 73.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #258343
- Category
- DIY
- Published
Description
I needed a better heatsink for my TOX3 S905x4 box. The old one was a simple aluminium Northbridge cooler measuring 38x38 mm. The new one is an full-copper heatsink from Cooltex, ordered from AliExpress, measuring 40x40x10 mm.
Unfortunately, on the TOX3, various SMD resistors and capacitors are higher than the CPU, which made it necessary to use a 1mm spacer. Simply attaching the heatsink with thermal glue, as with the TOX1, was not an option.
I designed a mount for my heatsink based on the Enzotech CNB-R1 Clip and printed it in ASA. So far, everything fits and works perfectly. PETG might also be sufficient, but that depends on the CPU’s maximum temperature.
I attached the heatsink and the shim to the CPU using thermal paste. The mount is secured using the pins from the old Northbridge mount.
Print spec
- Formats
- f3dstepstl
- Model files
- 3
- Total size
- 668 KB
- Largest file
- 375.4 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-
New -

-

-

