
Ngàm gắn quạt 2510 cho LDO Nitehawk36
- Downloads
- 101
- Likes
- 15
- Views
- 408
- Remixes
- 0
- Comments
- 0
Files 1 2 MB
- NiteHawk36-2510_Mount-Rev1_1773880136.stlSTL · 2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #257035
- Category
- Máy In 3D
- Published
Description
Mount for adding a 2510 fan onto the back of an LDO Nitehawk36. This uses the holes in the PCB (Rev C. version 1.4) so it should work for any Nitehawk mount you choose.
Work in progress, but fully functional.
Things to know:
-
You do not have full access to all the ports, you will need to plug in the connectors before mounting the fanmount. I am unsure if you can plugin the USB port, if anyone tries, please let me know!
-
This does not take a lot of space, but its good to check clearance at the back of the toolhead at Y max.
-
You will need two longer M3 bolts for mounting, and 4 M2.5 bolts for mounting the 2510 fan.
For powering the fan you have two options:
Option 1:
Splice in the fan with the Hotend cooling fan, this way the fan only comes on when the hotend is heating.
Option2:
There is an always-On 24v Aux port on the Nitehawk, you will need to solder a connector onto the board for that. I did not opt for this as the fan would be on whenever the printer is powered. But it is also an option.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 2 MB
- Largest file
- 2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-
New -
New -


