
Ốp lưng Samsung Galaxy S25 OrganicLoop - Phiên bản mới v1.9
- Downloads
- 100
- Likes
- 10
- Views
- 443
- Remixes
- 0
- Comments
- 0
Files 4 4.2 MB
- Galaxy_S25_Seamless_case_v1.9.stlSTL · 918.7 KB
- Galaxy_S25_Seamless_case_v1.9 p.3mf3MF · 231.1 KB
- Galaxy_S25_Seamless_case_v1.8.stlSTL · 2.5 MB
- Galaxy_S25_Seamless_case_v1.8 p.3mf3MF · 597.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #256692
- Category
- Dụng Cụ Tiện Ích
- Published
Description
This is my second Samsung Galaxy S25 case - OrganicLoop - version 1.9
No support is required in the slicer settings :-)
The yellow parts in the second picture are the supports for easy printing and must be removed after. Removing can be easy or sometimes a little difficult depending on the material and printer.
Version v1.9 (1,6 mm thickness) changes:
Camera cutout and Microphone holes optimized.
The Voronoi pattern is now better fixed around the camera and the light (flash).
Maybe it needs still small improvements - please give me feedback.
I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.
See also Voronoi - version 1.3 --> https://www.printables.com/de/model/1199041
and Hexagon - version 2.1 --> https://www.printables.com/model/1325213
I’d always happy about a „Download”, „Like”, „Make”, or a „⭐⭐⭐⭐⭐” rating!
Happy Printing
Toni :-)
----------------------------------------------------------------------------------------------------------------
Dies ist meine erste Samsung Galaxy S25 Hülle - OrganicLoop - Version 1.9
In den Slicer Einstellungen ist keine Unterstützung erforderlich :-)
Die gelben Teile im zweiten Bild dienen lediglich als Stützen zum einfachen Drucken und müssen anschließend entfernt werden. Das Entfernen kann je nach Material und Drucker einfach oder manchmal etwas schwierig sein
Version v1.9 (1,6 mm dicke) Änderungen:
Kameraausschnitt und Mikrofonlöcher optimiert.
Das Voronoi-Muster ist jetzt um die Kamera und das Licht (Blitz) besser fixiert.
Vielleicht bedarf es noch kleine Verbesserungen – gebe mir bitte Feedback.
Ich benutzte Filament TPU härte 95A und Slicer Temperaturen -> Düse: 220 °C, Bed: 50 °C. Für einen guten TPU-Druck sollte das Filament trocken sein.
Siehe auch Voronoi Version 1.3 --> https://www.printables.com/de/model/1199041
und Hexagon - Version 2.1 --> https://www.printables.com/model/1325213
Über ein „Download”, „Like”, „Make”, oder eine „⭐⭐⭐⭐⭐”-Bewertung würde ich mich immer freuen!
Viel Spaß beim Drucken
Toni :-)
Print spec
- Formats
- 3mfstl
- Model files
- 4
- Total size
- 4.2 MB
- Largest file
- 2.5 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-


