Skip to main content
F3D
Ốp lưng Samsung Galaxy S25 Hexagon - Phiên bản mới v2.1 1

2 images

Dụng Cụ Tiện Ích

Ốp lưng Samsung Galaxy S25 Hexagon - Phiên bản mới v2.1

By Toni_ThesBer

Downloads
143
Likes
10
Views
431

Files 2 358.1 KB

  • Galaxy_S25_Hexagon_case_v2.1.stlSTL · 262.8 KB
  • Galaxy_S25_Hexagon_case_v2.1 p.3mf3MF · 95.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is my third Samsung Galaxy S25 case - Hexagon - version 2.1

No support is required in the slicer settings :-)

The yellow parts in the second picture are the supports for easy printing and must be removed after. Removing can be easy or sometimes a little difficult depending on the material and printer.

Version v2.1 (1,6 mm thickness) changes:
Camera cutout and Microphone holes optimized.
Maybe it needs still small improvements - please give me feedback.

I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.

See also Voronoi - version 1.3 --> https://www.printables.com/de/model/1199041
and OrganicLoop - version 1.9 --> https://www.printables.com/model/1228855

I’d always happy about a „Download”, „Like”, „Make”, or a „⭐⭐⭐⭐⭐” rating!

Happy Printing
Toni :-)

----------------------------------------------------------------------------------------------------------------

Dies ist meine dritte Samsung Galaxy S25 Hülle - Hexagon - Version 2.1

In den Slicer Einstellungen ist keine Unterstützung erforderlich :-)

Die gelben Teile im zweiten Bild dienen lediglich als Stützen zum einfachen Drucken und müssen anschließend entfernt werden. Das Entfernen kann je nach Material und Drucker einfach oder manchmal etwas schwierig sein

Version v2.1 (1,6 mm dicke) Änderungen:
Kameraausschnitt und Mikrofonlöcher optimiert.
Vielleicht bedarf es noch kleine Verbesserungen – gebe mir bitte Feedback.

Ich benutzte Filament TPU härte 95A und Slicer Temperaturen -> Düse: 220 °C, Bed: 50 °C. Für einen guten TPU-Druck sollte das Filament trocken sein.

Siehe auch Voronoi Version 1.3 --> https://www.printables.com/de/model/1199041
und OrganicLoop - version 1.9 --> https://www.printables.com/model/1228855

Über ein „Download”, „Like”, „Make”, oder eine „⭐⭐⭐⭐⭐”-Bewertung würde ich mich immer freuen!

Viel Spaß beim Drucken
Toni :-)

Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
358.1 KB
Largest file
262.8 KB

0 comments

See all