
Ngăn kéo Gridfinity dạng module đã cải tiến
Remix of Ngăn kéo tổ chức mô-đun tương thích Gridfinity By TravisHouston_483368
- Downloads
- 3,498
- Likes
- 1,515
- Views
- 21,210
- Remixes
- 1
- Comments
- 0
Files 30 27.9 MB
- connectors-and-caps_1773807172.stepSTEP · 729.5 KB
- Modular_Gridfinity_Drawer_1x5_1773807174.stepSTEP · 690.3 KB
- Modular_Gridfinity_Drawer_Shell_1x5_1773807175.stepSTEP · 1.1 MB
- Modular_Gridfinity_Drawer_2x5_1773807176.stepSTEP · 1.4 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #256060
- Category
- DIY
- Published
Description
The original model was already pretty good, but I wanted the same style of drawer for everything, whether I want to use it with or without bins. Also I absolutely wanted a pull-out-protection. I also wanted labels, so I added slots for ca. 55x22 mm normal paper labels with 50x20 mm open label area.
Maximum Gridfinity bin height: 6 units
The 4x5 shell is not exactly double the width of the 2x4 shell, so you cannot stack 2x5 and 4x5 shells on top of one another properly.
I used to use eSun modified PLA and the 0.25 Speed preset on my Prusa MK4S printer. Now I use Sunlu PETG to great success. I printed the connector caps in FLEX (TPU V2) to get an easy and tight fit. I used one cap in the front and one in the back per rail.
Edit 2025-01-15: Made center pull-out-protection on the 4x5 shell shallower, to allow more clearance to the bins/contents.
Edit 2025-01-22: Fixed giant STEP file for 2x5 drawer.
Edit 2025-01-24: Added 3x5 Version.
Edit 2025-03-01: Added 1x5 Version.
Print spec
- Formats
- 3mfstepstl
- Model files
- 30
- Total size
- 27.9 MB
- Largest file
- 2.8 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-



