Bát gắn cuộn nhựa (spool holder) cho Flashforge AD5X

It can be extremely hard to find replacement/additional spool holder brackets for sale, so here's a printable one.

This one is designed to be low-profile like the official ones, and can be attached using the same screws - that's countersunk M3x6 for an unenclosed AD5X; countersunk M3x8 for the official enclosure; or countersunk M3x18 for a Torreva enclosure.

For best results, use ABS or ASA; but you can also use PLA as long as your spools are on the outside of your enclosure (or you just don't have an enclosure at all). PETG also works, but the slight flexibility makes it less ideal than the other options.

Use a layer height equal to half your nozzle diameter, print it solid (either all-walls or 100% infill), and print slow. A brim is recommended especially if using ABS. Print upright; do not lie them down.

I don't charge for my functional models. If you want to support my work, please purchase one of my paid models: https://www.printables.com/@Trumble/store