
Bộ vỏ PCB OpenDTU SolarZero cho SZ-OpenCB-V.5 Community-Board 2024/01
- Downloads
- 137
- Likes
- 8
- Views
- 1,199
- Remixes
- 0
- Comments
- 0
Files 2 1.9 MB
- OpenDTU_PCB_zerosolar_v10_1773682609.3mf3MF · 221 KB
- OpenDTU_PCB_zerosolar_v10_1773682610.stlSTL · 1.6 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #253053
- Category
- DIY
- Published
Description
📄 OpenDTU Zerosolar PCB
A compact enclosure specifically designed for the OpenDTU Community Board (SZ-OpenCB-V.5_0 by Nick Förster) with pre-soldered CMT2300A module – ideal for PV monitoring setups requiring minimal space and clean wiring.
If you like this model, I’d truly appreciate a like! Your support means a lot and inspires me to keep creating and sharing more designs. 💖
✅ Compatibility
This case supports:
- OpenDTU Community Board SZ-OpenCB-V.5_0 (2024-01)
- All ESP32 variants with 0.96" or 1.3" OLED displays (different VCC/GND layouts supported via jumpers)
- Designed for the CMT2300A pre-soldered version
📌 Other radio modules for Hoymiles HM types may also work, but radio model and connection differs.
🛠 Recommended Print Settings
- Material: PETG or ASA (for UV/weather resistance)
- Infill: 25–30 %
- Layer height: 0.2 mm
- Supports: Optional – minimal needed
- Walls: 2–3 perimeters
🌦 Use Cases
- PV system monitoring via OpenDTU
- Clean indoor or protected outdoor installations
- Ideal for Hoymiles HM/HMS family
🧩 Design and Functionality
- Minimal footprint with no cable clutter
- Enclosure accepts both OLED display sizes
- Rear-mounted SMA antenna improves reception
- Jumper-configurable board support for flexible display/power pinouts
- Updated version improves PCB retention and fastening points
- Optional CAN bus transceiver upgrade available (see related model in my collection)
📋 Materials List
- 1× printed enclosure (this model)
- 1× SZ-OpenCB-V.5_0 Community Board
- 1× ESP32 dev board
- 1× 0.96" or 1.3" OLED display
- 1× CMT2300A pre-soldered (or alternative radio module)
- 1× 15 cm 868 MHz SMA antenna (3 dBi)
- 4× M2.3×8 mm screws (DIN 7981)
📦 Case Compatibility & Credits
- Designed independently due to the community site going offline
- Based on board by Nick Förster (Foerster Solutions)
- Original PCB info:
- 💻 solarzero.org
- 📩 [email protected]
- 🛒 ebay shop: https://www.ebay.de/itm/405595200167
🔗 Related Models in My Collection
If you are interested in my upgrade with CAN-BUS transeiver please find the file in my collection:
🔌 OpenDTU on Battery / Zerosolar PCB
References:
Source for the printed circuit board:
Support for the PCB:
Reference tag of the PCB:
TDS & manual:
Link to the shop where I bought my version:
SZ-OpenCB-V.5_0 by Nick Förster 2024
Datenblatt-CommunityBoardV4.pdf (www.zerosolar.org)
OpenDTU CMT2300a E49-900M20S HMS/HMT | eBay
In you are happy with the model I would appreciate you hit the Like button.
Print spec
- Formats
- 3mfstl
- Model files
- 2
- Total size
- 1.9 MB
- Largest file
- 1.6 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-
New -

-

-

-


