Skip to main content
F3D
Ngàm gắn trạm Meshtastic năng lượng mặt trời… 1

1 image

DIY

Ngàm gắn trạm Meshtastic năng lượng mặt trời (Solar Node Mount)

By Rinodods_268674

Downloads
179
Likes
30
Views
1,140
Remixes
1

Files 4 4.3 MB

  • AIRTAK_200_100_70mm_Rev2_1773678884.stlSTL · 814.5 KB
  • AIRTAK_200_100_70mm_1773678885.stlSTL · 159.7 KB
  • AIRTAK_200_100_70mm_Rev3_1773678887.stlSTL · 1.9 MB
  • Long_box_mast_mount_Painter_1773678888.stlSTL · 1.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Easy method to mount an outdoor project box commonly used for Meshtastic solar nodes to a mast. Model fits boxes with mount holes spaced 58mm x 158mm such as the AIRTAK 200×100×70mm. 

https://www.amazon.com/dp/B0B2RH6Y9G?ref=ppx_yo2ov_dt_b_product_details&th=1

Mount should be printed in a heat and UV resistant filament such as ABS or ASA. I didn't require supports for a good outcome however there are cutouts through the bottom of the model to allow supports to be easily removed if you require them. Also suggest using strength profiles with 5-6 walls and at least 25% infill.

REV2

Extended and widened braces, increased base thickness and added cutouts on the top of the vblock to accommodate smaller diameter masts and to guide clamps without putting stress directly on the edge of the adapter.  

REV3

Additional strength improvements. Fillets added in select areas to improve adhesion to base section.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
4.3 MB
Largest file
1.9 MB

0 comments

See all