Bản Remix Elegoo Centauri Carbon Low Riser (Có khớp nối)

This is a low riser revision of the model I linked.  But I also took from this model and used their connector links https://www.printables.com/model/1257300-elegoo-centauri-carbon-led-riser .  This model is a remix of the two of them with some small mods.  With the connectors no glue is required which is nice because that's a pain.   All but the 12 connector plate require supports (I recommend normal supports) but they are easy to remove.  I'm printing it in Geeetech rainbow PLA.  PETG, PCTG, ABS, PLA+, PLA HT, etc. would all be good.  The print is setup in four .STL plates for ease of printing not .3MF format.

Thanks if you printed this!  I know it's not perfect but it works!  

I recently had to replace the motherboard because it bricked itself.  I left the USB stick in the machine and apparently that bricked it, so be warned!!!  

PSS Going to have to replace the motherboard again!  Don't know why!  It's just bricked!!!  Don't buy this printer…  11/29/25