
Mô hình máy bay LW-PLA Spitishfire V2 (Rubber Band / Chuck Plane)
- Downloads
- 114
- Likes
- 56
- Views
- 1,624
- Remixes
- 0
- Comments
- 0
Files 10 3.4 MB
- Part_Studio_1_-_Tail_Rear_1773637023.3mf3MF · 324.8 KB
- Part_Studio_1_-_Read_Section_1773637026.3mf3MF · 590 KB
- Part_Studio_1_-_Right_Stab_1773637027.3mf3MF · 76.8 KB
- Part_Studio_1_-_Left_Stab_1773637027.3mf3MF · 76.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #252449
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
This is my second version of my LW-PLA spitfire using Tom Stanton's Vase mode method.
the nose has a weight budget of around 27g for a propeller of your choice.
you can view the Onshape CAD model here. https://cad.onshape.com/documents/3d30eb99cba8d75f5b3615f0/w/e393cd2e7281c69d05210761/e/6541167114f80b1085ae0306?renderMode=0&uiState=685a73307432e52832f04a62
this is ultimately a rubber band plane, but it's still on the heavy side, but, it is sparless so this is fully 3D printed with only the need for super glue! I recommend printing with a bottom layer of 2-3 layers to allow a good glue interface. see my V1 for other print recommendations.
for good… crash performance, id recommend a tube that interfaces and is glued down the whole front section to absorb the impact.
while it looks very similar, this was almost a complete redo of V1!
Print spec
- Formats
- 3mf
- Model files
- 10
- Total size
- 3.4 MB
- Largest file
- 1,012.5 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-
New -

-

-

-

-

-


