
VoCore 5 Sim Dash với đèn LED báo tua
- Downloads
- 32
- Likes
- 2
- Views
- 361
- Remixes
- 0
- Comments
- 0
Files 8 2.3 MB
- Back_V2_1773618540.stlSTL · 160.7 KB
- Halter_V2_1773618541.stlSTL · 73.1 KB
- dash_fanatec_halter_1773618542.stlSTL · 66.5 KB
- Halter_1773618543.stlSTL · 87.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #252183
- Category
- Dụng Cụ Tiện Ích
- Published
Description
My case for a VoCore5 with a 24 segment LED light.
You'll need:
VoCore 5"
https://vocore.io/
Arduino Pro Micro
https://de.aliexpress.com/item/32768308647.html?spm=a2g0o.order_list.order_list_main.27.228f5c5fFbl5NE&gatewayAdapt=glo2deu
2x 4 Bit WS2812 5050 RGB LED
https://de.aliexpress.com/item/1005001565652020.html?spm=a2g0o.order_list.order_list_main.167.18f35c5fjQGJWD&gatewayAdapt=glo2deu
2x 8 Bit WS2812 5050 RGB LED
https://de.aliexpress.com/item/4000278750328.html?spm=a2g0o.order_list.order_list_main.172.18f35c5fjQGJWD&gatewayAdapt=glo2deu
I also used 4x M4 threaded inserts and 4x M4 screws with washers for the back to mount to the holder bracket and 3x M3 inserts for the front with 3x M3 countersunk screws, the length depends on the inserts you used. The holder bracket gets mounted to a 4040 extrusion profile with two sets of M8 screws with T-nuts. Or you use my connector plate to use a 20/25mm RAM Mount https://www.printables.com/model/1302183-ram-mount-2025mm-baseplate
For connecting the VoCore 5 and the Arduino you'll need one USB-C and USB Micro-B cable each.
For the software I'm using SimHub, the VoCore 5 will be recogniced in the "Devices" tab and Dash screens can be configured under "Dash Studio", the LEDs for shifting, flags, spotter etc. will be configured under "Arduino" -> "RGB LEDs".
V2:
Added V2 with new shells and the option to route the cables from the back instead of the front. FrontV2 also features a recess for a LED diffusor.
If you like my work and want to support me you can use my code @Niklas at checkout in the Prusa webstore to get bonus Prusameters with any printer purchase and free filament when you buy a Core One or XL.
Print spec
- Formats
- stl
- Model files
- 8
- Total size
- 2.3 MB
- Largest file
- 825.6 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-
New -

-

-
New -

-
New -


