Bộ Thước Đo Bán Kính Gridfinity (2mm - 20mm) - Bản Remix

A remix of the radius measuring set (for both inner and outer radii), designed to fit within a 1x2x3 Gridfinity box, made by MadeByAdam.

I made this remix with new pieces because I wasn't able to use the original pieces to measure a radius on the floor next to a wall, and other tight spaces. The included holder is the original.

You can find the changes made to the pieces in the “remix differences” section below.

These new pieces do have some downsides:

• The pieces are harder to remove from the holder.
• These pieces are 1 way, meaning you can't rotate them to change the direction of the label (you'd have to use the source code file to generate pieces with rotated labels).

I'd recommend printing the pieces with the label corner pointed to the back of the printer, and changing your slicer's seam position setting to “Back”, in order to make the seam only show up in that corner and not affect your measurements.

Additionally, I've also included the Python source code file where I used build123d to create the new pieces. If you know your way around Python, you can easily change the values at the top to create pieces with different sizes, radii, arcs, text (although they might not fit in the original holder).