
Khớp Nối Ball Joint Cho Giá Đỡ Raspberry Pi Camera
Remix of Giá đỡ camera Raspberry Pi khớp nối cho Prusa MK3 và MK2 By Sneaks
- Downloads
- 11
- Likes
- 5
- Views
- 100
- Remixes
- 0
- Comments
- 0
Files 5 23.7 MB
- mflink-ball-joint_1773448611.3mf3MF · 4.8 MB
- mlink-ball-joint_1773448612.stlSTL · 5.8 MB
- flink-ball-joint_1_1773448613.stlSTL · 6.2 MB
- flink-ball-joint_2_1773448614.stlSTL · 2.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #248150
- Category
- Máy In 3D
- Published
Description
If you've ever struggled to get your camera angle just right with standard hinges, this ball joint link is the solution. It provides incredible flexibility, allowing you to tilt and rotate the camera independently of the arm's main joints.
Assembly Instructions (Read carefully!):
-
The Ring First: Slide the threaded locking ring onto the link arm before attaching the ball.
-
Join the Parts: Insert the ball into the socket end of the link.
-
The Metal Core: Run an M3 x 25mm hex socket screw through the ball and into the link. Secure it with an M3 nut. This hardware is what provides the actual structural strength to the neck.
-
Optional Glue: For a permanent, "rock-solid" bond, you can apply a small amount of CA glue (superglue) between the ball and the link interface before tightening the screw.
Print Settings:
- Orientation: Use the provided 3mf layout. The ball is printed separately for easy printing.
Print spec
- Formats
- 3mfstl
- Model files
- 5
- Total size
- 23.7 MB
- Largest file
- 6.2 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-
New -
New -
New -

-

-

-

-


