Skip to main content
F3D
Prusa Pro HT90 Cable Bracket - Kẹp dây cáp thay thế 1

4 images

Máy In 3D

Prusa Pro HT90 Cable Bracket - Kẹp dây cáp thay thế

By tlamp

Likes
1
Views
60

Files 2 525.7 KB

  • HT90_Cable_Bracket_1773446465.stlSTL · 401.5 KB
  • HT90_Cable_Bracket_1773446466.stepSTEP · 124.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The original cable bracket broke recently, I made as close of a replica as I could. It uses the original screw and elastic string, the string is a little tricky to untie but can be done. It's easier to install the string before putting the screw in so you don't have to worry about slack. The STEP file and onshape link are available if you need to make any changes. 

Recommended Settings:

  • High temp material (ABS/ASA/Etc.)

  • 5 walls

  • 5 top and bottom layers

  • 20% gyroid infill

  • Disable single perimeter on bottom and top surface

  • Organic support from buildplate only on necessary overhangs (use support painting smart fill)

  • 0.15 mm top Z support distance (0.2 mm may lead to poor tolerance with the screw area)

Onshape link:

https://cad.onshape.com/documents/41f78c219c14ae4f9c78bb4d/w/fb93cfca30da181d36f1069f/e/714977f7f30be554fc74d987?renderMode=0&uiState=69b333e85158621d66cbea2a

Read more Show less

Print spec

Formats
stepstl
Model files
2
Total size
525.7 KB
Largest file
401.5 KB

0 comments

See all