Bộ Enclosure IKEA Lack cho Elegoo Neptune 3 Pro

This is my first Remix ever so I hope that all will be right. :-)

I remixed EDnation splendid design to fit my Neptune 3 Pro as the orginal was not big enough. I did it by extending the bottom corners by 60mm to fit the 3 Pro including the Filament sensor and a little bit of additional space for loading the filament though the sensor.

Except the files for the bottom corners I edited the whole .step file for the next remixes and to get the exact measurements for the acrylic planes. Everything else was kept orginal.

For the new doors you now need planes at 223mm x 564mm and for the other 3 you will need 443mm x 564mm.

My PSU ist still in its orginal position inside the printer and instead of drilling a big hole in the lower table for the cables I have my rear plane with an recess because my Neptune 3 Pro is sitting on another Enclosure for my Prusa MINI+.

I used this as a filament guide and this for a new mount for the filament detector.

As for printing tips I just printed everything with black PETG

Layer height 0.2mm

3 Perimeters

10% cubic infill

but any settings should work as well ;-)

Happy printing!

P.S.: When my ordered acrylic planes reach me and I installed them I'll try to update a few pictures.