Ngàm gắn BLTouch/CRTouch Zero Y Offset cho Creality Sprite Extruder

Should work for both a BLTouch and CRTouch since the mounting holes are the same.

Print oriented with the extruder-side mounting surface on the build plate. Supports are optional depending on how well-adjusted your printer is. I printed at 0.16 layer height, YMMV.

---

2023-12-23 - Version 2: I was getting rattling during high-speed X moves. This should be stiffer while remaining 1.5mm thick at the screw locations.

---

Offsets:

• X 35mm
• Y 0mm
• Z 0mm and tune with Klipper: PROBE_CALIBRATE or Marlin: Z Probe Wizard

Non-printed hardware used:

• 4x M3x8mm socket-head screws
• 2x M3 washers
• 2x M3 nuts
• 1x BLTouch v3.1

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

Yes

Resolution:

0.16

Infill: 

10% Gyroid

Filament: Overture PETG Black