Skip to main content
F3D
Giá đỡ ADXL345 cho Creality Sprite Extruder (Dùng chung/BTT) 1

8 images

Máy In 3D

Giá đỡ ADXL345 cho Creality Sprite Extruder (Dùng chung/BTT)

By Goofball_184342

Downloads
112
Likes
11
Views
1,217

Files 8 369.5 KB

  • Sprite_ADXL345_Bracket_BTT_1773407689.stlSTL · 46.7 KB
  • Sprite_ADXL345_Bracket_Generic_1773407689.stlSTL · 70.3 KB
  • Sprite_ADXL345_Bracket_Combined_1773407691.stlSTL · 87.7 KB
  • Sprite_ADXL345_Bracket_Base_1773407692.stlSTL · 29.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Printed as oriented. Sliced in PrusaSlicer with Organic supports enforced under the whole bridging area to insure tolerances maintained.

All holes are sized for no-insert M3x8 use.

2x M3x8 screws needed to mount either type of ADXL to bracket.

1x M3x8 screw used on left side of extruder to temporarily replace stock Sprite fan/ABL holder screw for solid mounting. Extruder stock M3x6 round-head screw moved to right side while mounted for measurement. Don't overtighten, you can damage / strip the threading out of the aluminum stepper body.

Klipper: Check MEASURE_AXES_NOISE is within range once mounted to the extruder. You may need to temporarily unplug the stock 3010 hot-end cooling fan while measuring to reduce noise (*). 

Use a suitable binder clip to attach to the bed while measuring Y.

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

Yes

Resolution:

0.20

Infill: 

10% Grid

Filament: Overture PETG Black

* If your stock hot-end cooling fan is loud/vibrates badly the Winsinn GFAN301024VB is a functional almost drop-in replacement. You will need to replace its JST-XH plug with a JST-PH. Recommend making the wiring as close to the same length as on the stock fan as possible, there's not really anywhere in there to store extra. Note: not sure on CFM/mm³ difference, Creality doesn't publish specs on fans. Do a hot-end PID retune after swap.

Category: 3D Printer Parts

Read more Show less

Print spec

Formats
objstl
Model files
8
Total size
369.5 KB
Largest file
87.7 KB

0 comments

See all