Skip to main content
F3D
Ngàm MGN12 cho máy đùn Creality Sprite Pro 1

4 images

Máy In 3D

Ngàm MGN12 cho máy đùn Creality Sprite Pro

Remix of Duender - Chuyển đổi 2 máy Creality Ender-3 thành CoreXY By SergeiIrbene_2885771

By vyssitude_2685501

Downloads
8
Likes
3
Views
129

Files 8 1.4 MB

  • sprite-mount-mgn12c_1773342768.stlSTL · 373.5 KB
  • sprite-mount-mgn12h_1773342769.stlSTL · 526.1 KB
  • Left_Block_Sprite_1773342770.stlSTL · 149.3 KB
  • Left_Clip_Sprite_1773342771.stlSTL · 39 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Based on the Stealthchanger shuttle this is a mount to attach the Creality Sprite Pro extruder to corexy printers with an MGN12 x axis gantry rail. It was made for the Duender but could probably work on other corexy machines like Vorons, etc.

There are two mounts to choose from, one for the MGN12C carriage block and one for the MGN12H carriage block.

To install use the included tools (Left Block Sprite, Right Block Sprite, Right Clip Sprite, Left Clip Sprite) in the same way you install a stealthchanger shuttle MGN12 without shuttle keeper. You then screw the original Sprite Pro metal mount to the MGN12 mount.

Notes:

  • Using a saw or an angle grinder you probably want to cut the extra unused pieces off of the original metal sprite bracket like the piece that presses the endstop on an ender and the pieces you clip belts to on an ender. The correct original bracket is the metal one used to attach sprite pro to a gantry with pom wheels. When the wheels are removed those holes match the holes on my mount. I've added an image of the correct original bracket to images.

  • The mount requires 3 5mm heat press inserts. Optionally two 3mm heat set inserts if you choose to add the included x-emdstop-bbt-S2DW to mount your limit switch and accelerometer.

  • You will need 6 3mm heat set inserts to complete the tools: Left Block Sprite, Right Block Sprite

  • x-emdstop-bbt-S2DW requires 2 3mm heat set inserts to mount an S2DW

Read more Show less

Print spec

Formats
stl
Model files
8
Total size
1.4 MB
Largest file
526.1 KB

0 comments

See all