Bumper trước Voron V0 Kirigami phong cách low-poly

Compatible with:

• V0 Kirigami Bed
• Salad Fork / Tri-Zero / Pandora's Box
• anything with an extrusion to attach it to

Supports the Rainbow Barf Logo LED or a Neopixel Mini Button

BOM

Item

Qty.

M3x5x4 Heatset Insert

2

M3 Hex Nut

2

M3x6 BHCS

4

Neopixel Mini Button

1

Rainbow Barf Logo LED (OPTIONAL)

1

Note: Only one LED Option is required.  Either the Neopixel Mini Button, or the Rainbow Barf Logo LED

Printing

• Use standard Voron print settings for all parts.
• Print the main_body stl for your printer.
• use a clear filament for parts with the [c] prefix.
• for Rainbow Barf, print [c]_rainbow_barf_diffuser.stl and rainbow_barf_carrier.stl
• for Neopixel Mini Button print [c]_neopixel_button_diffuser.stl and neopixel_button_carrier.stl
  

Assembly

• Remove the 2 supports inside the hexagonal hole of main_body
• Install 2 heatset inserts into the back of main_body
• Press the clear diffuser into logo_insert
• Press logo_insert into main_body
• Press LED (Rainbow Barf, or Neopixel Mini Button) into the appropriate carrier.  Solder wires either before, or after if necessary. (you may not be able to fit a jst connector through the carrier)
• Fit the carrier to the back of main_body and fasten with 2 M3x6 BHCS
• Attach main_body to the front of the kirigami bed frame, using 2 M3 hex nuts and 2 M3x6 BHCS

Credits

• Cameron at LDO Motors for the initial work on fitting a StealthBurner diffuser in the design
• WhoppingPochard and VinnyCordiero for the Rainbow Barf Logo LED

The most up to date version of this mod can always be found on GitHub