Parametric Rugged Box - Hộp đựng tùy biến thông số

Important

Required FreeCAD Version 1.2.0dev or 1.1.0rc3.  (I didn't test other version but can confirm it will not work in 1.0.2)

Varset

Box (See Picture for Reference)

Parameter

Description

Remark

Height*

Box Height

Min: 25mm

Lid Height*

Lid Height 

Min: 26mm (Room for improvement*)

Length*

Inner Box and Lid Length

Min: 70mm

Width*

Inner Box and Lid Width

Min: 20mm

Options**

Single

Single - Latch

yes/ no

*It will not affect the model, if you set the box dimension lower then the constrains.

** The other options are set to Read-Only. TBH i didn't test changes here.

How-To-Use

Simple Box

1. Setup you Box in VarSet

2. Select each body (Lid, Latch, Bolt, BoxAndInlay) and Export (File-Export, Ctrl+E). If you select more than one body than your slicer maybe  ask if the exported file should be loaded as a single object with multiple parts? - Select no and rearrange the bodies, well yes i guess you know what to

Hint: BoxAndInlay - Set Inlay it's to invisible or select only Box-Body for export. If you export Part BoxAndInlay where Box and Inlay is visible you get one pice, which you can't  divide in the slicer.

Inlay

1. Activate Inlay Body. 

2. Set Length of InlayBlock (Its not a parameter, because i don't you what you want here)

3. Edit skCustomInlay

4. ...

BOM

Piece

Normal

Single Latch

Latch

2

1

Bold

6

4

Lid

1

1

Box

1

1

Based on this model i made this Rugged case for a Trotec BM31: