Skip to main content
F3D
Phụ kiện nòng xoáy đa chế độ Shearforce (PBCAR) cho Nerf 1

9 images

Large file collection Đồ Chơi Ngoài Trời

Phụ kiện nòng xoáy đa chế độ Shearforce (PBCAR) cho Nerf

Remix of Little Rocket Barrel Lug By OUTOFDARTS

By LikeThePlatypus

Downloads
49
Likes
31
Views
551

Files 76 82.6 MB

  • SHEARFORCE_PBCAR_0631-332-PS_1773192280.3mf3MF · 885.7 KB
  • SHEARFORCE_PBCAR_0631-332_1773192281.3mf3MF · 857.2 KB
  • SHEARFORCE_PBCAR_0661-332-PS_1773192282.3mf3MF · 903.2 KB
  • SHEARFORCE_PBCAR_0661-332_1773192283.3mf3MF · 874.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The Shearforce PBCAR is a variable-mode rifling attachment platform inspired by the principle behind the Rexfire Akasha “Super BCAR.” Featuring an initial, more aggressive PCAR segment to pre-rotate the dart, followed by a gentler BCAR segment, this muzzle device is the cutting edge of springer accuracy. With a low-profile collet, this BCAR fits snugly on as little as 20mm of 16mm or similar OD exposed metal barrel. Additionally, internal baffling or optional porting controls and disperses turbulent air from under-barreled blasters,

FEATURES:
• Shearforce PBCAR
• 3D-printed variable-mode rifling attachment
• Aggressive PCAR pre-rotation, plus
• Gentile BCAR correction
• Turbulence-limiting baffling
• Compatible with most exposed 16mm barrels* 
• Secured with low-profile O-ring collet
• Different configurations for various FPS caps
• 3x2 version compatible with Worker Seagull

*Note: Barrel tip clearance is required for proper fit. 

FILES INCLUDED:
Shearforce PBCARs of varying configurations, including:
• 3-line PCAR + 3x2 BCARs
• 6-line PCAR + 3x2 BCARs
• 6-line PCAR + 3x4 BCARs
• 6-line PCAR + 3x6 BCARs
• Collet Keys of varying IDs

*Naming convention follows (PCAR)Degree, line, row - (BCAR) degree, line, row
So, 1261-332 is a 12-deg, 6-line PCAR stage followed by a 3-deg, 3x2 BCAR

RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: At least 3 wall loops, 20% Infill
• Others: Outer brim on BCAR body for better bed adhesion

HARDWARE NEEDED: Out of Darts' Hardware Kit includes Everything you need to print and assemble up to 3 PBCARs yourself, including• 18 3mm x 7mm x 3mm Flanged Bearings
• 18 M3 x 6mm Socket Head Screws
• 3 14mm OD Collet O-rings

Optionally for v0.4 and earlier:
• 18 M3 Heat-Set Inserts

SPECS:
• Exit Angle: 3-Degree, Inverse-progressive
• Lines: Variable, Segmented (6-3)
• Rows: up to 6 
• Total Bearings: 18
• Minimum Barrel Clearance: 20mm
• Material: Hardware
• Dimensions: varies
     • Assembled: 32mm x 60-125mm

LINKS:
• Hardware Kit
• Recommended Darts

Read more Show less

Print spec

Formats
3mff3zstep
Model files
76
Total size
82.6 MB
Largest file
3.5 MB

0 comments

See all