
Giá đỡ cuộn filament có vòng bi cho Flashforge AD5M Pro
- Downloads
- 4
- Likes
- 0
- Views
- 46
- Remixes
- 0
- Comments
- 0
Files 5 436.3 KB
- Achse V3.3mf3MF · 83.7 KB
- Kappe V3.3mf3MF · 28 KB
- Konus V3.3mf3MF · 19.4 KB
- Mutter V3.3mf3MF · 72.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #241422
- Category
- Máy In 3D
- Published
Description
Der Rollenhalter läuft mit zwei Kugellagern 20x32x7mm, die in die Spindel eingebaut werden. Die Spindel wird anschließend über die Achse geschoben und mit der Kappe und einer Schraube M3 gesichert.
Die Filamentrolle wird zwischen den Konen zentriert und mit der Mutter gesichert.
Gedruckt mit PLA, Anordnung auf der Druckplatte siehe Abbildung.
Ich empfehle dazu die Filamentführung https://www.printables.com/model/1582236-filament-guide-for-flashforge-ad5m-pro
Ein Modell für parametrisierte Adapterscheiben ist hier: https://www.printables.com/model/1624401-adapter-fur-filamentspulen-parametrisiert
The roll holder runs on two 20x32x7mm ball bearings, which are installed in the spindle. The spindle is then pushed over the axle and secured with the cap and an M3 screw.
The filament roll is centred between the cones and secured with the nut.
Printed with PLA, see illustration for arrangement on the printing plate.
I recommend the filament guide https://www.printables.com/model/1582236-filament-guide-for-flashforge-ad5m-pro
A model for parameterised adapter discs can be found here: https://www.printables.com/model/1624401-adapter-fur-filamentspulen-parametrisiert
Translated with DeepL.com (free version)
Print spec
- Formats
- 3mf
- Model files
- 5
- Total size
- 436.3 KB
- Largest file
- 232.9 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -
New -

-

-

-

-
New

