Adapter báng “Milspec” cho Bug-A-Salt (Stock Adapter)

“Milspec” Bug A Salt 3.0 Stock Adapter

In the pursuit of owning the ultimate tactical bug exterminator, I was in search of a robust, tight-fitting stock adapter for the Bug A Salt 3.0 that didn't require tapping screws into the body or damaging anything. 
Having not found one that quite met my needs, I decided to make my own.

…Enter the “Milspec” Bug A Salt Stock Adapter!

Hardware needed:

• M3 screws/nuts
 ○ 4x 25mm M3 screws
 ○ 4x M3 nuts
 ○ See photos of my measurements

Printing:

• Print the main body with the back square cutout facing up.
 ○ This is a bit of a difficult print to orient, so supports are REQUIRED.
 ○ I originally printed this with the orientation matching how it would be placed on the Bug A Salt (top side is facing the top of the printer) and my buffer tube adapter cracked due to the torsion/pressure along there. Therefore, layers need to be perpendicular to the stress of the buffer tube.
• I've provided sample .gcode files as well as the models.
 ○ These show orientation of how I printed these parts.
 ○ I printed in PETG, so your mileage may vary on how robust PLA or other materials are.
 ○ I printed in .3 layer line height to help with general part strength

Assembly:

• Place the M3 nuts in the 4 slots on the Bottom Mount.
• Hook the Bottom Mount through the hole where the trigger is - it should be able to fit with a 90 degree turn pretty easily.
• Place the Body Mount and Top Mount on, and screw down both sides evenly.
Screw until reasonably tight, but don't overtighten - this model was made to have a good amount of pressure from all sides, so you might have to squeeze the bottom and top mounts while screwing in the M3 screws.

----------
*General safety Disclaimer*
Any parts of this project are for the Bug-A-Salt 3.0, while not a toy, is not a firearm. This is intended to add functionality to a product that fires table salt to kill insects. Please print this responsibly and understand the implications of modifying this tool which may more closely appear as a functional firearm. I'll only be using this indoors, so if using “in public” you might want to print this in more obvious colors, etc.
----------