
Giá đựng marker tham số (Parametric)
- Downloads
- 23
- Likes
- 18
- Views
- 201
- Remixes
- 0
- Comments
- 0
Files 15 19.2 MB
- Marker_holder_v6_1772696698.f3dF3D · 469.1 KB
- 2x4_0deg_1772696699.stlSTL · 426.6 KB
- 2x6_0deg_1772696700.stlSTL · 465.7 KB
- 4x4_0deg_1772696701.stlSTL · 614.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #237489
- Category
- DIY
- Published
Description
a parametric Marker holder
Need a specific holder for your markers/pens/other then just tweak it to your liking.
Adjust
- Hole size
- Amount of Rows and columns of holes
- Depth of holes
- Tilt angle
- All other parameters if you're frisky
All the presaved models are made for TwinMarkers by DanPen - holes are 22x22mm and hole depth is 50mm
Pictures will be added later
How to adjust to you liking
Open Fusion360
- If you don't have Fusion you can get it here: https://www.autodesk.com/products/fusion-360/personal
Open the model parameters
- Click on the Modify
- Click on the Change Parameters
Adjust to make it yours
- Change the numbers in the red square
- In the blue square you can see the width and height of the finished model
- Adjust other parts under "User Parameters" some tweaks here might break the model
Export the .STL files
(Parameters windows must be closed before you are able to save)- Right click on the model name
- Click Save as Mesh
File settings
- Check the file format
- Check the unit type
- Set structure to "One file"
**Save the file
**- Change the name of the file if wanted
- Check the file type
- Change the save location (open file explore by pressing the three dots)
- Press save
Print spec
- Formats
- f3dstl
- Model files
- 15
- Total size
- 19.2 MB
- Largest file
- 3.8 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-

-


