
Mini Vault với khóa Lever Tumbler
- Downloads
- 4,078
- Likes
- 1,964
- Views
- 35,038
- Remixes
- 1
- Comments
- 0
Files 32 4.5 MB
- Box-Standard-BottomOPTIONAL_1772632961.stlSTL · 2.2 KB
- Jamb_1772632961.stlSTL · 242.1 KB
- Box-Standard_1772632962.stlSTL · 290.1 KB
- Box-Jumbo_1772632963.stlSTL · 303.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #235490
- Category
- DIY
- Published
Description
This vault uses 100% printed parts and adhesive/glue - no bearings or metal dowels. It can be printed on Prusa Mini (and larger printers) and the entire box prints without support - the only exception is the key but it prints well with organic supports.
In the video, I used the following filament:
- Prusament PETG - Galaxy Black & Urban Grey
- Hatchbox PETG - Bronze, Gold, Electric Lime, Red
I used JB Weld Plastic Bonder as the adhesive in the video. Weights and rubber feet can be used, but they are optional:
- Rubber Feet - https://www.amazon.com/dp/B0BLN4TCPT?ref=ppx_yo2ov_dt_b_fed_asin_title
- Metal Weights - https://www.amazon.com/dp/B072JXSN9P?ref=ppx_yo2ov_dt_b_fed_asin_title
There are 2 versions of the box, Standard and Jumbo. They both use the same door, but jamb and box pieces are different and the files are clearly labeled - be sure to select the correct jamb and box files!
A few tips for the assembly:
- If multiples of a file are required, the file name ends with “-X#” with the number indicating how many should be printed
- For Example: "Bolt-X12" means to print 12 Bolts
- The following files have pieces which bend, so I recommend printing with PETG:
- Lock-Spacer1
- Lock-Lever1
- Lock-Lever2
- Lock-Lever3
Print spec
- Formats
- stl
- Model files
- 32
- Total size
- 4.5 MB
- Largest file
- 754.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-
New -
New -

-



