Bệ Đỡ Bóng (Ball Stands)

Printed in various PLA+'s.
 

• Printed on: K1
• Layer height: 0.16mm (.2 is good as well)
• Speed: Initial layer and initial layer infill 50 mms--rest of the print setting were at 150 mms.
• **Infill:**10%-15% 
• Walls: 3-4
• Brim: No
• Support: No
• Part fan: On
• Side fan : On

I had to size this model up a little but so your print will be slightly larger than the one yo see in the pic.