Skip to main content
F3D
Thước đo Tsun (Cun) / Dụng cụ đánh dấu huyệt châm cứu 1

4 images

Sức Khỏe

Thước đo Tsun (Cun) / Dụng cụ đánh dấu huyệt châm cứu

By RobotAnna

Downloads
3
Views
98

Files 7 1.4 MB

  • Washer_1772402786.stlSTL · 50.1 KB
  • Wing_nut_1772402787.stlSTL · 42.9 KB
  • Cun_Meter_front_1772402787.stlSTL · 326.3 KB
  • Cun_Meter_back_1772402788.stlSTL · 62.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A tsun (or cun) meter is an acupuncture instrument used to locate acupuncture points by measuring the patient's proportional body inch, known as a "tsun" or "cun". It translates a patient's individual "1 tsun" measurement (the distance between the creases of their bent middle finger) into accurate 0.5, 1, 1.5, and 2-tsun distances.

HARDWARE

This is designed for a M4x10 hex bolt and M4 hex nut. These are widely available in Europe. The head of the hex bolt is 7.75mm x 6.9mm. The stem of the bolt is 10mm long, with a 4mm diameter. (See picture.) If a hex bolt and hex nut is used, then the caliper can be tightened and loosened without the need for a screwdriver.

PRINTING INSTRUCTIONS

Use any PLA Filament.

To avoid warping:

  • slice with a 2mm brim

  • use a smooth plate, with some adhesive such as hairspray or glue

  • let the print cool on the plate before removing

If the caliper does not turn smoothly, you could print 1 - 3 washers. They should be placed in between the front and back piece.

SCALE

If you scale this print up or down, keep the X and Y axes scaled to the same amount. This caliper does not function unless the arms remain at the same ratio from each other. Z (depth) can be scaled up, if you want the arms to be thicker, they are currently 3mm deep.

The dimensions of this cun meter are the same as the ones you can buy online. This is what modern acupuncture professionals use. The distance from the rotational center to each tip is:

  • 25mm 0.5 cun

  • 50mm 1 cun

  • 75mm 1.5 cun

  • 100mm 2 cun.

I suspect the ancient cun calipers would have been a little smaller, because 1 cun is actually 33.33mm! Most likely the distance from the center to each tip would have been:

  • 16.67mm 0.5 cun

  • 33.33mm 1 cun

  • 50.00mm 1.5 cun

  • 66.67mm 2 cun

You can learn about Chinese units of measurement on Wikipedia. I have not yet tested a resized caliper with an acupuncture professional. Use at your own risk.

OTHER

Read more Show less

Print spec

Formats
3mfbgcodestl
Model files
7
Total size
1.4 MB
Largest file
444.7 KB

0 comments

See all