Skip to main content
F3D
Kệ Treo Tường Chắc Chắn 1

3 images

Đồ Gia Dụng

Kệ Treo Tường Chắc Chắn

By gglockner_125788

Downloads
227
Likes
31
Views
1,145

Files 2 48.3 KB

  • Shelf-cutout_1772368651.3mf3MF · 24.3 KB
  • Shelf-nocut_1772368652.3mf3MF · 24.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#232128
Category
Đồ Gia Dụng
Published

Description

I designed this wall shelf to hold the charger for a cordless drill/driver. For strength, mount the center bottom hole through a wall stud, then you can use any kind of wall anchor for the 2 side holes. The mounting holes are sized for #8 wood screws.

There are 2 variations: one has a full rectangular shelf (not pictured), the other has a notch in the front to reduce filament and print time. Use the notched version when you need to support a rectangular item with feet, like the charger in the picture.

There are two ways to orient it on the print bed, each with advantages. If you print it shelf-down, you will get more strength but a chance of warping. If you print it back-down, warping will be reduced but the shelf will be somewhat less strong.

I prefer PETG for functional prints but you can print with PLA if needed. I used Atomic Filament PETG with a 0.6mm nozzle.

Built in Onshape, here is a link to the model.

Read more Show less

Print spec

Formats
3mf
Model files
2
Total size
48.3 KB
Largest file
24.3 KB

0 comments

See all