
Máy In 3D
3D BOATY – Mẫu test bridging & overhang cho máy in 3D
- Downloads
- 10,424
- Likes
- 2,427
- Views
- 52,858
- Remixes
- 4
- Comments
- 0
Files 4 2.9 MB
- Boaty_1772346181.stlSTL · 583.4 KB
- Boaty_1772346182.stepSTEP · 1.2 MB
- Boaty-Old_1772346184.stlSTL · 439 KB
- Boaty-Old_1772346184.stepSTEP · 710.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 4
Kẹp giữ túi thức ăn 3D tiện lợi cho nhà bếpBybrunocubateli · 06/01/2026
Love Boaty: Mô hình kiểm tra máy in 3D (Phiên bản mở rộng)ByCarson1111_2304950 · 04/09/2026
Mô hình ghế công viên trên đế (Boaty on a plate) in 3D độc đáoByBoVuji_4166494 · 03/20/2026
Benchy Boaty BenchByTJL4 · 03/03/2026
Details
- Model ID
- #231975
- Category
- Máy In 3D
- Published
Description
3DBoaty is a 3D model designed for testing 3D printers. It's a small model, only taking 16.5 grams of material to print. There is also a scoresheet to measure how good your Boaty came out and compare it with others.
Step file Included
What the Boaty Tests:
- Bed adhesion - Starting from just 6 small feet, good bed adhesion is a must for a successful print.
- Overhangs - The arch in the 3 frames of the Boaty and the arch on the arms.
- Bridging - Tests your bridging capabilities up to 25mm.
- Top Surface Quality
- Hole Precision
- Max Flow
- Small Details
- And for an added challenge, speed. Test to see how fast you can print one. Sub 10 min Boaty?
Scoresheet: (Total 21 points)
- Bed Adhesion (6 Points) - -1 point for every foot that loses contact with the bed. -6 points if you need to use a brim.
- Bridging test 1 (5 points) - Check the underside of the Boaty, -1 point for every 1-3 loose strands. Like in the image. (EX: 4 loose strands is -2 points)
- Bridging test 2 (2 points) - You should be able to clearly see through the gap on each side of the Boaty. -1 point for each side you can't see through.
- Small Details (1 point) - You should be able to read the small text on the back clearly.
- Hole Precision (2 points) - You should be able to fit 1.75mm filament through at least 2 of the holes on the back side of the Boaty. -1 point if you can't fit the filament through 2 holes. -2 If you can't fit filament through any holes.
- Max Flow (1 Point) - If your max flow rate is too high, there will be a transition from matte to shiny going from yellow to green. -1 point if the transition is visibly noticeable.
- Overhang test (3 points) - On the bottom of the Boaty there are 3 arches to test overhang performance. -1 point for every arch with drooping overhangs.
- Top Surface test (1 point) - The seat of the Boaty should feel smooth to the touch. -1 if it is too rough. (over extrusion)
Speed Boaty Challenge:
The goal of this challenge is to see how fast you can print the Boaty while still resembling a Boaty. You can DM me here with your submission. I will only be keeping the top 5 entries.
- Practically_Printed (Instagram)
9m 31.87s
Print spec
- Formats
- stepstl
- Model files
- 4
- Total size
- 2.9 MB
- Largest file
- 1.2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-
New -

-


