Skip to main content
F3D
Adapter Spindle 52mm cho OpenBuilds CNC 1

4 images

DIY

Adapter Spindle 52mm cho OpenBuilds CNC

By AdlerAzevedo_2915734

Downloads
1
Views
64

Files 2 244.1 KB

  • Adaptador_spindle_Z_openbuilds_1772310591.3mf3MF · 93.8 KB
  • Adaptador_spindle_Z_openbuilds_1772310593.f3dF3D · 150.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#231285
Category
DIY
Published

Description

Description

52mm Spindle Adapter for OpenBuilds CNC

This model is a structural 52 mm spindle adapter designed for OpenBuilds-based CNC machines.
It was developed with a strong focus on mechanical rigidity, dimensional stability, and load distribution, making it suitable for real CNC applications such as light to medium-duty machining (wood, MDF, plastics, PCBs, etc.).

The design prioritizes:

  • Secure clamping of 52 mm spindles

  • Large contact area with OpenBuilds Z-axis / carriage plates

  • Reduced flex and vibration during operation

  • Compatibility with standard OpenBuilds hardware and fasteners

⚠ Important note:
This is a structural part, therefore print settings directly affect strength, safety, and service life.


Recommended Printing Settings (Structural Part)

🔹 Material

  • Nylo (recommended) – superior mechanical and thermal resistance

  • ABS – acceptable for moderate loads

  • PLA – not recommended for long-term use due to heat and vibration sensitivity


  • Print with the part’s Z-axis aligned with the printer’s Z-axis

  • Avoid orientations that place main loads across layer lines


🔹 Layer Height

  • 0.20 mm (best balance between strength and print time)

  • 0.24 mm is acceptable for faster prints with thick walls


🔹 Walls / Perimeters

  • 6 to 8 perimeters

  • Minimum wall thickness: 2.0 – 2.4 mm


🔹 Solid Layers

  • Top layers: 6 to 8

  • Bottom layers: 6 to 8


🔹 Infill

  • Pattern: Gyroid or Cubic

  • Density: 40% – 60%

  • For maximum rigidity: 80% Gyroid


🔹 Temperatures (ABS reference)

  • Nozzle: 240 – 250 °C

  • Bed: 100 – 110 °C

  • Enclosed printer: strongly recommended


🔹 Post-processing (optional but recommended)

  • Tighten mounting screws with moderate torque

  • Check spindle alignment after installation

  • Avoid prolonged exposure to excessive heat (>70 °C for PETG / >90 °C for ABS)


Safety Disclaimer

This model does not replace industrial-grade metal mounts.
Use at your own risk and always respect the mechanical limits of the material, printer, and CNC machine.

Read more Show less

Print spec

Formats
3mff3d
Model files
2
Total size
244.1 KB
Largest file
150.3 KB

0 comments

See all