
Porcupine Shell Holder – Giá giữ vỏ đạn gắn thắt lưng (parametric)
- Downloads
- 45
- Likes
- 11
- Views
- 520
- Remixes
- 1
- Comments
- 0
Files 3 581.6 KB
- EXAMPLE_-_Porcupine_Shell_Holster_-_5_1772181911.stlSTL · 222.4 KB
- EXAMPLE_-_Porcupine_Shell_Holster_-_2_1772181913.stlSTL · 128 KB
- Porcupine_Shell_Holster_1772181914.f3dF3D · 231.1 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #230041
- Category
- Thể Thao & Ngoài Trời
- Published
Description
Design
Porcupine is a modular belt attached shotshell holster intended for Five Stand, but can be adapted for other clay shooting disciplines. It is best utilized for shooting sports where there is not very much dynamic movement. May also not be suitable for hunting as gravity keeps the shells in place and moving through brush may knock the shells out. Has not been tested on long treks so your mileage may vary.
The design is parametric to allow for customization of shell gauge, amount of shells held, and width of strap or belt it is attached to.
Example .STLs included are for 2 and 5 12ga shells
Parameters
ShellDia is the diameter of shell. Tested with 12ga shells. Shell measurements are taken from SAAMI standards.
PatNum is the number of slots on the module. 10 is the max.
StrapWidth is width of belt or strap being used. 15mm minimun and 40mm max.
Print spec
- Formats
- f3dstl
- Model files
- 3
- Total size
- 581.6 KB
- Largest file
- 231.1 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-
New -

-



